Skip Navigation Website Accessibility
 


Vox Cambridge 50 w/NuTube in PreAmp

left in stock in

Low in store inventory, may be subject to change


The VOX Cambridge50 is a modern modeling guitar amplifier powered by Nutube and Celestion for powerful and responsive tones.

The VOX Cambridge50 is an ambitious product that opens new possibilities in a modeling guitar amp. It features Nutube, for real tube distortion and response, and an open-backed cabinet equipped with a 12-inch Celestion speaker for the classic VOX tone. Its simple design allows you to easily dial in settings on the face of the amp, or save your favorite settings as presets. With 11 types of amp models, 8 built-in effects, and a built-in tuner, this amp is perfect for many applications and any style of music.

Eleven types of further refined amp model

Proprietary VET (Virtual Element Technology) allows an unprecedented degree of realism. In addition to the amp models, the original circuit itself has been reevaluated, carefully modeling the way in which the sound is effected by the wooden cabinet and the response of the 12-inch speaker. In addition to the classic AC30, this single unit gives you the sounds of a wide range of amps including well-known tube amps, modern high-gain amps, and rare boutique amps. LINE is also provided to support acoustic-electric guitars and keyboards, further expanding the useful scope of this unit.

Amp models: DELUXE CL, BOUTIQUE CL, BOUTIQUE OD, VOX AC30, VOX AC30TB, BRIT 1959, BRIT 800, BRIT VM, SL-OD, DOUBLE REC, LINE

 

Eight effect types

There’s a generous selection of the effect types that are indispensable for shaping your sound. Both modulation and delay/reverb can be used simultaneously, and each provides a choice of four types, giving you a total of eight effects. This offers total control for shaping your guitar sound. A tap button is also provided, so you can set the delay time and other parameters intuitively.

Effect types: MODULATION (CHORUS, FLANGER, ORG PHASE, TWIN TREM), DELAY/REVERB (A.DELAY, TAPE ECHO, SPRING, HALL)

 

Open-backed cabinet equipped with a Celestion VX12 speaker

The VOX Cambridge50 features a Celestion VX12 speaker that takes full advantage of the 50W output. The rear of the unit uses an open-backed structure, delivering the open and crisp sound that you expect from a 12-inch speaker.

 

Equipped with a Nutube

The VOX Cambridge50 features a Nutube, the new-generation vacuum tube. Using electro-luminescent technology with the same structure as a conventional vacuum tube, the Nutube has been featured in a variety of products from VOX and others. The distortion and sense of compression that you expect from a vacuum tube, and even the response and playing feel, perfectly capture the feeling of playing a vacuum tube. In addition to the light-weight design that was unobtainable by a conventional vacuum tube amp, the Nutube brings additional unique advantages such as being maintenance-free and cost-effective.

 

The USB audio interface

The VOX Cambridge50 features USB audio interface functionality that lets you connect to your computer via USB and record the Nutube sound directly. In addition to letting you enjoy performing, this unit is perfect for integrating with your home recording setup.

Tone Room editor/librarian software delivers an even higher level of convenience

The Tone Room editor/librarian software supports the VOX Cambridge50. You can use it to access parameters that are not accessible from the unit itself, and store your settings in a library. In addition to Mac/Windows, iOS/Android are supported, allowing easy access via USB.

 

Add a foot switch for expanded functionality

The separately sold VFS5 footswitch lets you use your foot to change programs. When the footswitch is connected, program memories are expanded to eight types. This provides perfect support for your on-stage performances.

 

JamVOX III modeling software bundled

With JamVOX III modeling software bundled, you can easily enjoy playing guitar on your PC. You can take advantage of the GXT function that lets you extract, emphasize, or remove a specific part from an existing song; you can also use the music player function to play back a loop from a song that you are learning or practicing, and even change its tempo. ASIO drivers are supported, so you can also record and play back via software other than JamVOX III, such as a DAW or guitar amp simulator.

SPECIFICATIONS

OUTPUT POWER

Maximum approx. 50 W RMS @4 ohms


AMP MODELS

11 (10 + Line)


EFFECTS

8


PRESET PROGRAMS

11


USER PROGRAMS

2 (Using the VFS5 foot switch increases the number of user programs to 8)


INPUT/OUTPUT

INPUT jack, Headphones jack (with cabinet simulator), AUX IN jack, FOOT SW jack, USB (Type B) port (Audio ouput and Tone Room software


SPEAKER

Celestion VX12 12″ 4 Ohms


VALVE

Nutube 6P1


SAMPLING FREQUENCY

44.1 kHz


POWER SUPPLY:

  • AC adapter (DC 19V)

CURRENT CONSUMPTION

3.42A


DIMENSIONS (W X D X H)

452 mm x 240 mm x 410 mm/17.80″ x 9.45″ x 16.14″


WEIGHT

8.9 kg / 19.62 lbs

 


INCLUDED ITEMS

AC adapter (DC 19V), JamVOX III download card

 


ACCESSORIES (SOLD SEPARATELY)

VOX VFS2 footswitch, VOX VFS5 footswitch

Specifications and features are subject to change without notice.