Grover Original Locking Rotomatics - Black Chrome

The introduction of the new Grover Locking Rotomatics® give you the ease of use provided by a standard tuning machine and the positive locking of our internal cam post. Simply insert the string through the string hole, pull to tension by hand and begin tuning. As you start to tune, only the locking cam in the string post turns. Once the string is locked, the string post begins to turn allowing you to bring the string to pitch. In less then one revolution of the string post, you will be in tune, to stay in tune. Gear ratio is 18:1.

Please Note: Grover tuning machines produced prior 1985 use different specifications for threading and shaft sizing. Current production replacement parts are not interchangeable on vintage (pre-1985) Grover tuning machines.

• Mounting hole location at 6 O'clock
• Gear ratio = 18:1
• Peghole size requirement = 25/64 in. (10mm)
• Post Diameter = 15/64 in. (6mm)
• String Post length = 1 5/16 in. (33mm)
• Bushing Type = Hex head / Bolt bushing
• Collar length = 25/64 in. (10mm)